Josh Black Josh Black's Profile Page

Josh Black Josh Black

0 Course Enrolled • 0 Course Completed

Biography

JN0-683 100％시험패스덤프문제, JN0-683인증시험자료

Juniper JN0-683인증시험패스 하는 동시에 여러분의 인생에는 획기적인 일 발생한것이죠, 사업에서의 상승세는 당연한것입니다. IT업계종사자라면 누구나 이런 자격증을 취득하고싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 많습니다. 패스할확율은 아주 낮습니다. 노력하지않고야 당연히 불가능하죠.Juniper JN0-683시험은 기초지식 그리고 능숙한 전업지식이 필요요 합니다. 우리DumpTOP는 여러분들한테Juniper JN0-683시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. 우리DumpTOP의Juniper JN0-683시험관련자료로 여러분은 짧은시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.

Juniper JN0-683 시험요강:

주제
소개

주제 1

Data Center Interconnect: For Data Center Engineers, this part focuses on interconnecting data centers, covering Layer 2 and Layer 3 stretching, stitching fabrics together, and using EVPN-signaled VXLAN for seamless communication between data centers.

주제 2

EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.

주제 3

Data Center Deployment and Management: This section assesses the expertise of data center networking professionals like architects and engineers, focusing on key deployment concepts. Topics include Zero-touch provisioning (ZTP), which automates device setup in data centers without manual input.

주제 4

Data Center Multitenancy and Security: This section tests knowledge of single-tenant and multitenant data center setups. Candidates such as Data Center Professionals are evaluated on ensuring tenant traffic isolation at both Layer 2 and Layer 3 levels in shared infrastructure environments.

>> JN0-683 100％시험패스 덤프문제 <<

JN0-683인증시험자료 - JN0-683인기덤프자료

JN0-683인증시험패스는 쉬운 일은 아닙니다. 높은 전문지식은 필수입니다.하지만 자신은 이 방면 지식이 없다면 DumpTOP가 도움을 드릴 수 있습니다. DumpTOP의 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어 여러분들의 고민을 해결해드릴 수 있습니다. 우리는 최고의JN0-683인증시험문제와 답을 제공합니다. DumpTOP는 최선을 다하여 여러분이 한번에JN0-683인증시험을 패스하도록 도와드릴 것입니다. 여러분은 우리 DumpTOP 선택함으로 일석이조의 이익을 누릴 수 있습니다. 첫쨰는 관여지식은 아주 알차게 공부하실 수 있습니다.둘째는 바로 시험을 안전하게 한번에 통과하실 수 있다는 거죠.그리고 우리는 일년무료 업데이트서비스를 제공합니다.덤프가 업뎃이되면 우리는 모두 무료로 보내드립니다.만약 시험에서 실패한다면 우리 또한 덤프비용전액을 환불해 드립니다.

최신 JNCIP-DC JN0-683 무료샘플문제 (Q33-Q38):

질문 # 33
You want to convert an MX Series router from a VXLAN Layer 2 gateway to a VXLAN Layer 3 gateway for VNI 100. You have already configured an IRB interface. In this scenario, which command would you use to accomplish this task?

A. set protocols ospf area 0.0.0.0 interface irb.100 passive
B. set bridge-domains VLAN-100 routing-interface irb.100
C. set vlans VLAN-100 13-interface irb.100
D. set protocols isis interface irb.100 passive

정답：B

설명：
* Scenario Overview:
* Converting an MX Series router from a VXLAN Layer 2 gateway to a VXLAN Layer 3 gateway involves transitioning the router's functionality from simply bridging traffic within a VXLAN segment to routing traffic between different segments.
* Key Configuration Requirement:
* IRB (Integrated Routing and Bridging) Interface:An IRB interface allows for both Layer 2 switching and Layer 3 routing. To enable routing for a specific VNI (VXLAN Network Identifier), the IRB interface must be associated with the routing function in the corresponding bridge domain.
* Correct Command:
* C. set bridge-domains VLAN-100 routing-interface irb.100:This command correctly binds the IRB interface to the bridge domain, enabling Layer 3 routing functionality within the VXLAN for VNI 100. This effectively transitions the device from operating solely as a Layer 2 gateway to a Layer 3 gateway.
Data Center References:
* This configuration step is essential when converting a Layer 2 VXLAN gateway to a Layer 3 gateway, enabling the MX Series router to route between VXLAN segments.

질문 # 34
What are three actions available tor MAC move limiting? (Choose three.)

A. shutdown
B. enable
C. drop
D. log
E. filter

정답：A,C,D

설명：
* MAC Move Limiting:
* MAC move limiting is a security feature used in network switches to detect and mitigate rapid changes in MAC address locations, which could indicate a network issue or an attack such as MAC flapping or spoofing.
* When a MAC address is learned on a different interface than it was previously learned, the switch can take various actions to prevent potential issues.
* Available Actions:
* A. drop:This action drops packets from the MAC address if it violates the move limit, effectively blocking communication from the offending MAC address.
* D. log:This action logs the MAC move event without disrupting traffic, allowing network administrators to monitor and investigate the event.
* E. shutdown:This action shuts down the interface on which the MAC address violation occurred, effectively stopping all traffic on that interface to prevent further issues.
* Other Actions (Not Correct):
* B. filter:Filtering is not typically associated with MAC move limiting; it generally refers to applying ACLs or other mechanisms to filter traffic.
* C. enable:This is not an action related to MAC move limiting, as it does not represent a specific reaction to a MAC move event.
Data Center References:
* MAC move limiting is crucial for maintaining network stability and security, particularly in environments with dynamic or large-scale Layer 2 networks where MAC addresses might frequently change locations.

질문 # 35
You are deploying an IP fabric with an oversubscription ratio of 3:1.
In this scenario, which two statements are correct? (Choose two.)

A. The oversubscription ratio increases when you remove leaf devices.
B. The oversubscription ratio decreases when you add leaf devices.
C. The oversubscription ratio remains the same when you add leaf devices.
D. The oversubscription ratio remains the same when you remove leaf devices.

정답：A,C

설명：
* Understanding Oversubscription Ratio in IP Fabrics:
* The oversubscription ratio in an IP fabric typically refers to the ratio of the available bandwidth at the edge of the network (leaves) to the available bandwidth at the core or spine. A 3:1 oversubscription ratio means that for every 3 units of bandwidth at the leaves, there is 1 unit of bandwidth at the spine.
* Impact of Adding or Removing Leaf Devices:
* Removing Leaf Devices:When you remove leaf devices, the amount of total edge bandwidth decreases while the bandwidth in the spine remains constant. This causes the oversubscription ratio toincreasebecause there is now less total bandwidth to distribute across the same amount of spine bandwidth.
* Adding Leaf Devices:Conversely, when you add leaf devices, the total edge bandwidth increases. Since the spine bandwidth remains the same, the oversubscription ratio would remain the same if the additional leaves consume their share of the available bandwidth proportionally.
Conclusion:
* Option C:Correct-Removing leaf devices increases the oversubscription ratio.
* Option D:Correct-Adding leaf devices typically maintains the oversubscription ratio assuming uniform bandwidth distribution.

질문 # 36
Which two statements are true about EVPN routes for Data Center Interconnect? (Choose two.)

A. Type 2 EVPN routes require a VXLAN tunnel to the protocol next hop.
B. Type 5 EVPN routes do not require a VXLAN tunnel to the protocol next hop.
C. Type 2 EVPN routes do not require a VXLAN tunnel to the protocol next hop.
D. Type 5 EVPN routes require a VXLAN tunnel to the protocol next hop.

정답：B,C

설명：
* Type 2 EVPN Routes:
* Type 2 routesadvertise MAC addresses within an EVPN instance and are used primarily for Layer 2 bridging. These routes do not require a VXLAN tunnel to the protocol next hop because they operate within the same Layer 2 domain.
* Type 5 EVPN Routes:
* Type 5 routesare used to advertise IP prefixes (Layer 3 routes) within EVPN. Similar to Type 2 routes, they do not require a VXLAN tunnel to the protocol next hop because they represent L3 routes, which are managed at the routing layer without the need for VXLAN encapsulation.
Conclusion:
* Option B:Correct-Type 2 routes do not need a VXLAN tunnel to the next hop, as they are used for Layer 2.
* Option D:Correct-Type 5 routes also do not need a VXLAN tunnel because they operate at Layer 3, handling IP prefixes.

질문 # 37
You manage an IP fabric with an EVPN-VXLAN overlay. You have multiple tenants separated using multiple unique VRF instances. You want to determine the routing information that belongs in each routing instance's routing table.
In this scenario, which property is used for this purpose?

A. the VRF table label
B. the VRF target community
C. the route distinguisher value
D. the routing instance type

정답：C

설명：
* Understanding VRF and Routing Instances:
* In an EVPN-VXLAN overlay network, multiple tenants are separated using unique VRF (Virtual Routing and Forwarding) instances. Each VRF instance maintains its own routing table, allowing for isolated routing domains within the same network infrastructure.
* Role of Route Distinguisher:
* Route Distinguisher (RD):The RD is a unique identifier used in MPLS and EVPN environments to distinguish routes belonging to different VRFs. The RD is prepended to the IP address in the route advertisement, ensuring that routes from different tenants remain unique even if they use the same IP address range.
* Correct Property:
* D. the route distinguisher value:This is the correct answer because the RD is crucial in determining which routing information belongs to which VRF instance. It ensures that each VRF' s routing table only contains relevant routes, maintaining isolation between tenants.
Data Center References:
* The RD is a key element in MPLS and EVPN-based multi-tenant environments, ensuring proper routing segregation and isolation for different VRFs within the data center fabric.

질문 # 38
......

Juniper 인증 JN0-683시험이 너무 어려워서 시험 볼 엄두도 나지 않는다구요? DumpTOP 덤프만 공부하신다면 IT인증시험공부고민은 이젠 그만 하셔도 됩니다. DumpTOP에서 제공해드리는Juniper 인증 JN0-683시험대비 덤프는 덤프제공사이트에서 가장 최신버전이여서 시험패스는 한방에 갑니다. Juniper 인증 JN0-683시험뿐만 아니라 IT인증시험에 관한 모든 시험에 대비한 덤프를 제공해드립니다. 많은 애용 바랍니다.

JN0-683인증시험자료: https://www.dumptop.com/Juniper/JN0-683-dump.html